Maidstone sits roughly twenty minutes from our base, which makes it one of the easiest patches for us to service — rapid surveys, same-week repairs and no travel padding on the quote. We've been patching, resheeting and re-guttering industrial roofs across the ME postcodes for forty years.
Maidstone's commercial property sits in clusters: Quarry Wood and Allington along the M20 / A20 corridor, the Aylesford trade-park area straddling the J5 and J6 interchanges, Parkwood and Sutton Road south of the town centre, and a tail of smaller estates running out toward Bearsted and Hollingbourne. Almost all of it is profiled-metal-roofed industrial stock from the 1980s and 90s — the exact age bracket where annual repair work starts to matter.
The most common calls we take from Maidstone are leak investigations on twin-skin roofs where the rooflights have UV-degraded and started crazing, and gutter renewal on the older trade-park terraces where the original GRP or steel valley gutters have rusted through at the joints. Sheet replacement on storm-damaged eaves is a regular winter job. We carry stock profiles and crank-bend gutters in the yard, so a repair on a Tuesday survey is often back-watertight by the following week.
Because we're a mid-Kent contractor, our cost base on Maidstone work is genuinely low — no overnight accommodation, no London-rate labour, and a surveyor can usually be on your roof within two or three working days of the call. For estate managers running multi-unit portfolios across ME14, ME15, ME16 and ME20, that turnaround is the difference between catching a small leak and writing off a tenant's stock.
Twin-skin roofs leak in places you'd never guess. We pressure-wash, dye-test and physically inspect from above and below to find the actual source rather than the wet patch.
Storm-lifted, impact-damaged or end-of-life profiled sheets — matched to the existing profile in matching colour. Common on the older Aylesford and Quarry Wood units.
Failing valley gutters are the single biggest source of leaks on Maidstone trade-park stock. We strip, line or fully replace with bespoke cranked steel.
Old GRP rooflights crack, yellow and become a working-at-height hazard. We swap for non-fragile triple-skin rated to ACR[M]001.
Lead and aluminium flashings around plant, parapets and brick abutments. Common on the older mixed-use units around Parkwood and Sutton Road.
Small-area damage to asbestos cement sheets — safely repaired or encapsulated by our trained operatives, working to the Control of Asbestos Regulations 2012. More on asbestos →
"Our trade-counter building in ME15 had been leaking into the back warehouse for about two winters and the previous contractor never quite found the source. New-Cladd had a surveyor up there within three days, traced it to a failed lap-seal under a rooflight, and had it watertight inside a fortnight. The valley gutter renewal they quoted at the same time came in on price and on programme."
All of them — ME14, ME15, ME16, ME17, ME18 and ME20 (Aylesford / Larkfield). We also routinely cross into neighbouring ME postcodes including Sittingbourne (ME10), Chatham (ME4/ME5) and Snodland (ME6).
Active leaks during business hours we generally attend within 24–48 hours. We're based in Kent so Maidstone is typically a 20–30 minute drive — no waiting for a crew to come down from London or up from the coast.
Regularly. Both estates are full of the kind of multi-let industrial stock we've been repairing since the 1980s. We're familiar with the typical roof build-ups, the gutter geometries and the access constraints across both sites.
For small-area damage, yes — under non-licensable asbestos work rules where appropriate. For larger areas of failure, full strip and replacement is usually more economic over a 10-year horizon. We'll give you both costs at survey stage.
Yes. For multi-unit estates and larger occupier sites we run annual or bi-annual inspection contracts — gutters cleared, sheet condition logged, rooflights inspected, and a costed remedials schedule produced for the year ahead.
